Noise not only impacts a user’s ability to concentrate and focus on the task at hand, but without a good quality Noise Cancelling microphone it also impacts other participants on (conference) calls.
Poly’s headsets are used in the most demanding environments where clear audio is critical, such as emergency dispatch and command and control applications.
When considering Noise Cancelling headsets it’s important to note that different technology is used to reduce noise for the headset user and hence acts on the receiving side (typically this is Active Noise Cancelling) compared to Noise Cancelling for the far end, which acts on the microphone (transmitting) side.
The amount of noise reduction will depend on many factors, for example a headset, such as the Voyager 8200 UC, that covers the ear completely provides better noise reduction compared to one that sits on the ear. Leatherette ear cushions provide a greater acoustic seal to the ear and will provide better noise reduction compared to foam ear cushions.
Headsets with earbuds that sit inside the ear, such as the Voyager 6200 UC, provide a greater isolation from external sounds. An advantage of the Voyager 6200 UC headset is that it can still be used with one ear bud removed allowing users to still hear what’s going on around them.
For greater noise reduction passive noise isolation can be combined with active noise cancellation. Poly offers one of the largest range of Active Noise Cancelling headsets in the market.
There are three types of Active Noise Cancelling:
To ensure that background noise is not picked up by the headset microphone, which could interrupt the call, many Poly headsets include Noise Cancelling microphone booms. These booms include a special directional microphone that picks up sound in a specific pattern that is focused towards the user’s mouth. Sounds that come from all directions, such as background noise, are picked up with less amplitude and therefore are heard by the far end at a reduced level.
To provide the best noise reduction the optimum position for a Noise Cancelling microphone boom is directly in front of the user’s mouth. Since this can be distracting for the user, as it's in their eyeline, a compromise is made so that the microphone boom is typically located at the corner of the mouth. The microphone booms can be bent so that the microphone is in the correct position. For the Poly EncorePro 700 Series an extendable microphone boom is used to provide the best placement.
The Voyager 5200 UC, designed as an on-the-go product, includes a discrete microphone boom that is great for indoor or outdoor use. Windsmart® technology and a unique DSP is used to reduce disruptive wind noise for outdoor use.
For products without a microphone boom such as the Voyager 6200 UC and Voyager 8200 UC, four microphones are used along with beam-forming technology to focus on the user’s voice while minimizing background noise.
Transmit noise reduction can be enhanced when additional, physically separated microphones are added, such as those on Poly headsets with Acoustic Fence technology.
Single additional microphone: Poly’s Acoustic Fence technology, as found in the Blackwire 8225, uses a long Noise Cancelling microphone boom with an additional microphone located on the ear cup. This additional microphone picks up the background noise and using DSP this noise is minimized from the user’s voice.
Multiple additional microphones: The Voyager Focus 2 provides even greater transmit noise reduction despite its shorter microphone boom. In this implementation Poly’s Acoustic Fence technology uses four microphones in total, two microphones on the boom and one on each ear cup, to create a virtual pick up bubble focused at the front of the user’s mouth. Anything outside of this bubble (typically noise) is ignored.
Poly keeps developing headsets that suit different levels of noise reduction. With the Poly Voyager Focus 2 their best noise reduction is reached yet, for both receiver and transmitter. It’s all the Poly next-level engineering you expect, with the wear-it-all-day comfort you need.
Would you like to try out if one of Poly's Active Noise Cancelling headsets are suitable for you or your employees? We now offer you a FREE test set-up that suits you best. Please fill in the form on this page, so our colleagues can advise and accommodate you with your free trial.
Request your free test set-up now!